With the North West Shelf moving into its decommissioning phase, A heartfelt thank you goes out to the dedicated team behind this achievement, highlighting the excellence and collaborative spirit that drive our unwavering commitment to innovation. We are thrilled to be leading the future of offshore technology.

These Fully certified Hazardous Area Generators and Compressor are currently available for rent in WA.

Zone 2 185CFM Compressor 

• Delivered Flow: 185 SCFM
• Delivered Pressure (psi): 100-110 psig
• Hazardous Area Rating: Zone 2 IIB T3

Zone 2 80kVA Generator

Rated at 80kVA @ 0.8PF diesel driven generator at 400V, 50Hz, 3 phase for ZONE 2 – Temperature Class T3 and Gas Group IIA 

Zone II 30kVA Generator

30KVA 50 Hz 400V 3Ph ATEX 3G ZONE2 T3 200C

SCM and VSM Shakers

As the drilling industry started picking up onshore in western Australia the utilisation of our recent purchase of Scomi oil tools started picking up to. We believe we are the only people in WA who rent out shakers not only do we have the SGM we also have VSM 300’s in or fleet.

All equipment compliant with the relevant Australian Standards as well as IECEX electrical standards.

• The SCM Shaker provides excellent conveyance of solids. With shaker performance being characterised as a product of screening area and g’s, the SCM Shaker has one of the highest performance ratings in the industry. When run at 7g’s combined with its large screening area, the SCM Shaker has a performance rating of 210 ft2-g (83.6 m2-g).
• Speed: 1800 RPM
• Number of screens: 4
• Dimensions: 3391mm x 1746mm x 1562mm

Fume Capture Lab System 20Ft Container

When one of our existing clients asked us if we would invest in building them a purpose-built lab cabin fit for elements of the Queensland outback we embraced this under “challenge is our tradition”. After many months of planning and design to meet NATA accreditation we turned this around in our new facility in Neerabup. 

This Lab system was installed in fully powered 20ft container with AC, work benches, lighting, blinded windows and laminated doors. 

Fume cupboard was designed by our partners to capture and remove air-borne hazardous substances generated during laboratory experiments (such as gases, vapours, aerosols and particulates/dust).

High efficiency Horizontal (air) Flow Wet-Scrubber scrubs acid fumes from the airstream prior to discharge. (Independent third-party testing report available on ap-plication.) 

Incorporates self-regulating water reticulation system including sump with overflow, bleed and dump ports to enable regulation. 

Generators and Fuel Tanks for hire

Through a tendering process we were awarded to supply two large generators (825kVA & 500kVA) and 4FF Self bundled fuel 4,200L tank for the commissioning of Waitsa 2 Gas plant. 

Both these generators were purchased brand new for this project due to the importance of them not going down. 

Originally these were contracted for 6 months but in the end it turned out to be 14 month hire. 

Download Brochures and data sheets on the related products below:

Spooler Ex84 Truck

The spooler Ex84 truck unit is intended for running Control Line into the Well. The cable drums units operate by creating back tension which stop the spool from the free running and keeps the light tight.

Skid-based, installed right on the 8×4 cab chassis, requires no time for installation & maintenance. 

Used for Installing Electrical submersible pumps. To date this has been one of the hardest and most expensive projects undertaken by our rental division team. Our tech’s onsite were getting hit for down time as we were waiting on a 3^rd party crane to change out the 10 ton cable real. We previously attempted carrying this out by building a trailer mounted cable spooler, but we came across the problem that the trailer ended up being a wide load. We use the existing hydraulic system to pick up the real and we use an independent 2 cylinder kobo to run in/out of hole.  

Rotating Capability: 23RPM
Average ESP Installation: 100 Joints (1000 Meters)
8×4 Cab Chassis
Run in Cycles: 45 Min per 300 Meter Section